An extended boom excavator is a specialty excavator with a longer boom than a standard excavator to achieve greater digging distance. If you want to change your excavator to a digger long front boom, you need to do the following steps to install it:

 

 

Step 1: Preparations Before installing your digger long front boom, you need to make sure you have all the necessary tools and equipment. These may include:

  • Lifting equipment
  • Bolts and nuts
  • Hand and power tools
  • Gloves, goggles and other safety equipment

 

 

Step 2: Remove the Existing Boom First you need to remove the original boom. In order to do this, you will need:

  • Extend the boom on the excavator to its maximum distance
  • Remove the existing boom from the excavator using lifting equipment
  • Remove all attachments and pipes on the existing boom

 

Step 3: Installing the digger long front boom Once the existing boom is removed, you can begin installing the new excavator long boom. You need:

  • Install the digger longfront boom and connect it with the excavator’s steel wire rope
  • Connect the hydraulic system to the new boom with the correct piping
  • Fasten the new boom to the excavator with bolts and nuts

 

 

Step 4: Testing and Adjusting After installation, you need to test and adjust to ensure that the excavator long front boom will work properly. This could include:

  • Test the extend and retract function of the new boom
  • Adjust the hydraulic system of the excavator to accommodate the new boom
  • Operational testing to ensure the new boom will not affect the balance and stability of the excavator

 

Step 5: Maintenance and Maintenance Finally, you need to perform regular maintenance and maintenance to ensure that the digger long front boom is always in good working order. This could include:

  • Regularly inspect the pipes and attachments on the new boom to ensure they are not damaged or worn
  • Clean hydraulic system and other machine components
  • Replacement of worn parts

 

Summary: Installing an digger long front boom requires careful planning and preparation, and requires specialized skill and knowledge. If you are not sure how to install the extension arm of the excavator, please contact our professional technicians of Hite Machinery.